0402 Multi Layer Ceramic...
0402 capacitor is Mounted either by flow or reflow soldering methods and gives excellent dielectric strength due to uniform structure of dielectric layers
There are 57 products.
0402 capacitor is Mounted either by flow or reflow soldering methods and gives excellent dielectric strength due to uniform structure of dielectric layers
The IR Receiver is a type of Diode but different from the LED. It does not emit any light but detects the presence of light. This diode allows some current to pass through it after detecting light and amount of current flow is directly proportional to the amount of light detected and makes a pair with IR transmitter.
2n2222 is a bipolar junction transistor with NPN polarity designed to use in general purpose amplification and switching application. The transistor can handle collector current up to 800mA. Its key features are low power, low to medium current, medium voltage, and moderate speed.
Heat Shrink Sleeve 4mm are excellent for insulation. They have exceptional insulation characteristics, excellent stress control properties; long-term weather and regular wear and tear resistance, ease of installation and reliable performance in even in harshest of the situations.
These High performance 2:1 heat shrink material tubes, bundles, and protects cables; wire and hoses are used for a wide range of DIY applications. It is used extensively for cable and wire harnessing, strain relief, insulation, color-coding, identification, and protection.
Replacement of Heating Element for SMD Rework Station.
High heating rate so fast heating up, good insulating property, high efficiency and long life.
0402 capacitor is Mounted either by flow or reflow soldering methods and gives excellent dielectric strength due to uniform structure of dielectric layers
The IR Receiver is a type of Diode but different from the LED. It does not emit any light but detects the presence of light. This diode allows some current to pass through it after detecting light and amount of current flow is directly proportional to the amount of light detected and makes a pair with IR transmitter.
2N3904 is a general purpose and very popular NPN Transistor based on Silicon Epitaxial Planar Technology. This NPN transistor finds application in amplification and a simple switching circuit. It comes with a TO-92 package with very less noise. Its pins are compatible with through-hole assembly on PCB.
Heat Shrink Sleeve 6mm are excellent for insulation. They have exceptional insulation characteristics, excellent stress control properties; long-term weather and regular wear and tear resistance, ease of installation and reliable performance in even in harshest of the situations.
These High performance 2:1 heat shrink material tubes, bundles, and protects cables; wire and hoses are used for a wide range of DIY applications. It is used extensively for cable and wire harnessing, strain relief, insulation, color-coding, identification, and protection.
The A1015 transistors are PNP silicon epitaxial planar transistors. The transistors are well suitable for audio frequency amplifier applications. The transistors measure approx. 0.7 inch long and 0.1 inch wide.
An IR transmitter contains an LED that emits infrared light. Thus the name. The receiver contains either a photodiode or a phototransistor (usually the latter). This component passes more or less current depending on the amount of IR light falling on it.
The LED is switched on and off in a coded sequence.
Heat Shrink Sleeve 8mm are excellent for insulation. They have exceptional insulation characteristics, excellent stress control properties; long-term weather and regular wear and tear resistance, ease of installation and reliable performance in even in harshest of the situations.
These High performance 2:1 heat shrink material tubes, bundles, and protects cables; wire and hoses are used for a wide range of DIY applications. It is used extensively for cable and wire harnessing, strain relief, insulation, color-coding, identification, and protection.