These Jumper Wires are great for creating circuits between your microcontroller and the breadboard on the bots Reusable for fast build a prototype of an electronic circuit.  Soldering is not required.

Wires are flexible, durable, reusable, easy to trace, easy to connect and disconnect.

With these Jumper wires you can modify or revise the circuits easily.

It is an RM065 200K Ohm Trimpot Trimmer Potentiometer.  The potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver.

0402 capacitor is Mounted either by flow or reflow soldering methods and gives excellent dielectric strength due to uniform structure of dielectric layers 

Fr207 is a Fast Recovery Rectifier diode, designed specifically for circuits that need to convert alternating current to direct current. It can pass currents of 2p to 2 A, and have peak inverse voltage (PIV) rating of 1,000 V.

A crystal oscillator is an electronic circuit or device which is used to generate a stable frequency with the help of a crystal instead of a tuned circuit. The crystal when vibrates, it acts like a resonator & as a result generates an oscillated frequency. The resonator circuit uses a crystal to generate the oscillation.

Replacement of Heating Element for SMD Rework Station.

High heating rate so fast heating up, good insulating property, high efficiency and long life.

It is an RM065 200 Ohm Trimpot Trimmer Potentiometer.  The potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver.

0402 capacitor is Mounted either by flow or reflow soldering methods and gives excellent dielectric strength due to uniform structure of dielectric layers 

2N3904 is a general purpose and very popular NPN Transistor based on Silicon Epitaxial Planar Technology. This NPN transistor finds application in amplification and a simple switching circuit. It comes with a TO-92 package with very less noise. Its pins are compatible with through-hole assembly on PCB.

It is an RM065 500 Ohm Trimpot Trimmer Potentiometer.  The potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver.

These Jumper Wires are great for creating circuits between your microcontroller and the breadboard on the bots Reusable for fast build a prototype of an electronic circuit.  Soldering is not required.

Wires are flexible, durable, reusable, easy to trace, easy to connect and disconnect.

With these Jumper wires you can modify or revise the circuits easily.

This is a silicon rectifier diode with high current capability. 1N5399 diode has a cathode (-) and anode (+). In the schematic symbol, the tip of the triangle with the line on top of it is the cathode. The cathode is marked on the body of a diode by a band.Diode polarity Current can flow from the anode to the cathode only and never from the cathode to the anode - 1N5399 diode is like a one way valve.

It is an RM065 5K Ohm Trimpot Trimmer Potentiometer.  The potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver.

It is an RM065 50K Ohm Trimpot Trimmer Potentiometer.  The potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver.

AMS1117-5.0V, 1A, Voltage Regulator IC is a series of low dropout three -terminal regulators with a dropout of 5.0V at 1A load current. AMS 1117 features a very low standby current 2mA.

AMS 1117 offers thermal shut down and current limit functions, to assure the stability of chip and power system. And it uses a trimming technique to guarantee output voltage accuracy within 2%. Other output voltage accuracy can be customized on demand, such as 1%

It is an RM065 10K Ohm Trimpot Trimmer Potentiometer.  The potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver.